Choose from Various Hardware Types
Purchase by Type and by Length
Face Mount 16 Gauge galvanized Industrial Pre studded hardware |
Doors to 18' FT HIGH  Hardware installs above an opening on the face of the wall. 1 ft wide plates fit over the strips securing each into position. Hardware is common for larger doors and industrial applications. Total Cost: $6.50 / FT  |
Header Mount 16 Gauge galvanized Industrial Pre studded hardware |
Doors to 18' FT HIGH  Hardware installs vertically up into the jamb or header of a door opening. 1 ft wide plates fit over the strips securing each into position. Hardware is common for larger doors and industrial applications Total Cost: $6.75 / FT |
16 Gauge Galvanized Universal Mount Hardware |
Doors to 18' FT HIGH  Hardware installs both as header or face mount. 1 ft wide plates fit over the strips securing each into position. Hardware is common for larger doors and industrial applications. Total Cost: $7.50 / FT |
Aluminum Max Bullet Hardware - Universal |
Doors to 18' FT HIGH  Strip installation requires only pre- punched strips. No bolts and nuts are required. Hardware installs both as face or header mount. Individual strips snap into position. Total Cost: $17.50 / FT |
Polymer Max Bullet - Universal |
MB- P Doors to 9' FT High  Strip installation requires only pre- punched strips. No bolts and nuts are required. Hardware installs both as face or header mount. Individual strip snap into position. Polymer technology is common on smaller kits or light duty strips. Total Cost: $5.50 / FT |
16 Gauge Galvanized Face Mount Hardware - Powder Coated White |
Doors to 18' FT High  Clamping Plates are powder coated white for a cleaner and commercial look Total Cost: $17.50 / FT |
Flat Bar - Pre Drilled for loop strips |
Doors to 9' FT HIGH  Flat Bar is common for smaller strip door kits & Hood Enclosures – Strips have a built in overlap Total Cost: $3.90 / FT |
Sliding Strip Door Hardware - FIXED PANEL |
Doors to 9' FT HIGH  Sliding Strip Door Hardware is made up of 16 Gauge FACE Mount Galvanized track and trolley connector with corresponding track Track is twice the width of the door Trolley –4 Wheel B-Bearing Total Cost: $29.00 / FT |
Accordion Retracting Hardware - Galvanized |
Doors to 18' FT High  Accordion hardware allows overlapping 12" strips to retract to the sides of a door. Hardware can be installed so all strips slide to one side (single sliding) or so that half the strips bunch to the right and half to the left (bi parting). Total Cost: $59.00 / FT |
Stand off Mount - Allows Overhead door to slide behind curtains |
Doors to 9' FT HIGH  Stand Off hardware projects out from a wall and runs across the width of the opening thus creating space for an overhead door to slide behing the strips. Total Cost: $25.00 / FT |